Once it’s fully cured, it offers remarkable benefits such as hydrophobicity, shine, and protection against UV rays, color fading and other environmental hazards. Before you apply any type of paint sealer or protection to your car’s paint, you need to prep your car first this. Generally, this involves two to three steps depending on the condition of your car. Ceramic car paint coating enhances the appearance of a car by providing a high gloss finish and deepening the color of the paint.

Conventional wax is easy to apply by hand and inexpensive but tends to break down quickly when exposed to the elements. Ceramic coating is much more durable, forming a chemically-bonded coat that resists UV rays, heat, acidic chemicals and oxidization. In layman’s terms it’s a layer of “glass like” clear for all of your car’s exterior surfaces. Professional detailers can charge up to $2,000 or more to paint correct and apply a ceramic coating. Ceramic coat applications will not hide scratches, so proper paint correction to remove scratches is a must for the best shine and depth. The main purpose of claying is to remove any of the embedded contaminants in the paintwork which will not be removed by washing alone. As I mentioned above, your paintwork must be completely free from imperfections before using a ceramic coating, otherwise, the coating will not bond properly.

Preparing The Car For Ceramic Coating Removal

Otherwise, the coating will fail and not achieve anywhere close to its maximum durability capability. Preparing the paintwork for a coating is the most labour intensive aspect of the process. The coating application itself is relatively quick, but the preparation does take a good while. After completing the necessary preparations and pre-wipe cleaning, you are ready to begin the application of the ceramic product. Nevertheless, it is important to address specific application areas and conditions before moving forward. Although most professional detailers swear by polishing as the best coating removal process, this method requires a lot of experience, and is not recommended for beginners.

If your car’s exterior paint has spiderweb swirls and scratches, then the only way to remove them is by applying a few drops of scratch remover and buffing the whole car. No matter how many products you’ve used, there’s always going to be some stubborn stuff that has embedded itself within the actual layers of the paint. The clay bar will pick the majority of these bonded contaminants and leave the surface as close to perfect as can practically be achieved. Ceramic coatings, just like your paint, can be scratched and scuffed.

Ceramic Coat Application: Step-by-Step Process

In terms of ceramic nano coatings, the scientific concept of low surface energy explains the positive behavior of a hydrophobic surface on automotive surfaces. Understanding how ceramic coating hydrophobics work will directly lead to greater long-term performance and satisfaction both for vehicle owners and professional detailers. Every ceramic coating manufacturer has specific instructions on how to prep and install each coating. It is extremely important for the ceramic coating that all surfaces be prepared properly before any coating can be installed. Without proper prep work being done a coating cannot perform to its optimum levels and is at risk of failing altogether. Contact us today for ceramic car coating, and you will enjoy our services since our ceramic coating cost is affordable. Our professional ceramic coating team will guide you and make your car’s paint look great.

Any dirt or debris that gets mixed with the coating during application can cause it to bind with the coat, resulting in an uneven finish. Just remember that before applying a new coat, you need to remove the old coating first, so that you have a fresh canvas for the next coating to adhere to and protect. Once you completed your final buff, move back up to step 2 again to apply your IPA solution to the next 4′ x 4′ section of your car and repeat until the entire  vehicle is completed. Leave the ceramic coating to dry for a minimum of 2-3 hours to bond. If you’d like to apply a second coat, you can do this after the 2-3 hour wait time as well.

And you are wondering how you can apply ceramic coating to your car’s paint the right way. Paying a professional to apply a ceramic pro coating to your vehicle is the best option. Professionals follow a four-step process dedicated to preparing your car perfectly for a ceramic coating.

Choose a high-quality ceramic coating product from a reputable brand. Read the manufacturer’s instructions for application and curing time. Often, vehicle owners or detailers form snap judgements or conclusions about ceramic coating effectiveness or durability based on hydrophobic properties.

Reducing its exposure to sunlight, weather, and assorted debris will keep it performing when you need it. Contact us now for a free estimate and an Adonis Automotive Protection Professional will contact you with details.

Spray your degreaser on a microfiber cloth and wipe your car’s exterior. Go panel by panel to make sure you’ve covered every square inch. Follow this step with a clean microfiber cloth by buffing the areas. Read more about Keramikversiegelung mit Garantie here. For this stage, you’ll need to buy a chemical that degreases your car. A degreaser will remove any oils, waxes, and other residues that you might have applied while polishing.